Photo: a residential install in Colleyville, just next to Grapevine and Southlake. We will add Grapevine and Southlake job photos here as soon as we have sets we can show.
A Grapevine landscaper for both cities
Hunter Cerny founded CZ Designs in Grapevine in 2021. Residential design and installation is one of our three core services, along with commercial installation and commercial maintenance. We do relatively fewer residential jobs than commercial ones, and we take on residential work when the design and install are a good fit — typically larger yards and custom homes.
Most residential projects we take on start around $40k. That is not a hard cutoff: we will still talk through a smaller scope if that is what you need. For a breakdown of what drives cost in this area, see our Southlake landscaping and irrigation cost guide.
Design first, then install
We start with a 2D plan — a scaled drawing of beds, paths, patios, plants and notes an install crew can build from — and, when it helps you decide, a 3D design so you can see the yard before anything goes in the ground. Then we install it: planting, bed lines, flagstone, river rock, drainage and irrigation, with plants chosen for North Texas heat and clay soil.
More detail on the process is on our residential design & installation page.
Irrigation, designed for local watering rules
Hunter is a Texas Licensed Irrigator (LI #23726). Irrigation is part of the install, not an add-on, and the controller is programmed for the city the property is in:
- Grapevine prohibits watering with an irrigation system between 10 a.m. and 6 p.m., year-round. We set start times so watering finishes before 10 a.m. Source: City of Grapevine – Water Conservation.
- Southlake allows automatic irrigation two assigned days a week (even-numbered addresses Wednesday and Saturday; odd-numbered Thursday and Sunday), between 6 p.m. and 10 a.m. Source: City of Southlake – Enforcement of Watering Restrictions.
Beds typically get drip; turf gets spray or rotor zones. We also install a rain and freeze sensor so the system shuts off when it should. City-specific notes, including Grapevine irrigation permits, are on the Grapevine and Southlake pages.
Residential work like this
These photos are from real CZ Designs residential installs. Where we know the city, we name it; we do not name clients.
More photos are on our work. Nearby work also includes a residential install in Colleyville.
Frequently asked questions
Do you design and install landscapes in Grapevine and Southlake?
Yes. Our office is at 312 W Northwest Hwy in Grapevine, and we do residential landscape design and installation — with irrigation — in Grapevine, Southlake, Colleyville and across Dallas–Fort Worth.
Do I need a design before you install?
For anything beyond a small bed refresh, yes. A 2D or 3D design makes the quote accurate and the finished yard predictable. We create the design as part of the project.
How do you handle Grapevine and Southlake watering rules?
Grapevine bans sprinkler irrigation from 10 a.m. to 6 p.m. year-round. Southlake allows automatic systems two assigned days a week, between 6 p.m. and 10 a.m. We program each controller for the city the property is in and its assigned days, and lay out heads so water stays off streets and sidewalks.
Is irrigation included with a landscape install?
Yes. Irrigation is designed and installed with the landscape by Hunter Cerny, a Texas Licensed Irrigator (LI #23726). Beds typically get drip; turf gets spray or rotor zones sized to the area.
What does a residential landscape project typically cost?
It depends on size, design and materials. Most residential projects we take on start around $40k, and we quoted mid-range Southlake work with hardscape and standard irrigation in the $26,000–$75,000 range in our cost guide. We will still talk through a smaller scope if that is what you need.
